Hellwig Sway Bar 7889 Bedienungsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

Rear Stabilizer Bar

2007 Toyota Tundra

Thank you for purchasing a quality Hellwig Product.

TORQUE TABLE

BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs.

SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES.

NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST BAR, THE WEIGHT OF THE VEHICLE MUSTBE ON THE SUSPEN

SION, AS IF DRIVING DOWN THE ROAD. DO NOT RAISE VEHICLEBY FRAME.

NOTE: THIS KIT INCLUDES LOCK NUTS WHICH REQUIRE TIGHTENING WITH A WRENCH AFTER BEING STARTED BY HAND.

7692 (R-7692) 08/22/2007

1. Place the U-bolts over the axle tubes as shown in photos 2 & 3. Be careful to place the U-bolts under any

brake lines or wires so not to damage them when the U-bolts are tightened.

2. Lubricate the D-shaped bushings and place them on the flat areas of the bar to line up with the U-bolts. Place

the U-plates over the D bushings.

559-734-7451 800-367-5480 FAX 559-734-7460

3 4

Threaded Hole

Driver Side

Passenger Side

Attach end links to outermost hole

1 2

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSRear Stabilizer Bar2007 Toyota TundraThank you for purchasing a quality Hellwig Product.TORQUE TABLEBOLT SIZE: 3/8” = 20-30 f

Seite 2 - End LinkAssembly

ATTENTION INSTALLER: PLEASE MAKE SURE CUSTOMER RECEIVES THIS INSTRUCTION SHEET,ALL IMPORTANT NOTE CARDS, WARNING CARDS AND THE WARRANTYFORM3. Place th

Verwandte Modelle: Sway Bar 7699 | Sway Bar 7692 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Hellwig Sway Bar 7889 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Hellwig Sway Bar 7889 herunter. Hellwig Sway Bar 7889 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: Sway Bar 7699 | Sway Bar 7692 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Hellwig Sway Bar 7889